The VYRO SPECTER is the shisha for everyone. Thanks to the blow-off switches, it offers over 17 different blow-offs and therefore exactly the blow-off style that suits you! Swap the sleeves of the shisha and adjust the look of your SPECTER as you want. Whether classic epoxy resin look, modern and simple look with the aluminum sleeves in black and white or as a large pipe. Be curious which sleeves will be available so that you never get bored with your shisha. The VYRO SPECTER is a compact plug-in shisha, in which the aim of the development was to offer a shisha with the right blow-off for everyone, without having to rebuild the shisha. In addition, as is usual for VYRO, we wanted to pack the best smoking behavior into a small shisha. For this purpose, attention was paid to an extremely direct response and good draft.
Switch it up!
Choose your blow-off and change it as you like while smoking without rebuilding. With over 17 standard blow-offs, there's a favorite for everyone. All you have to do is turn the lower or upper blow-off switch. Magnets also automatically snap it into place in the correct settings. (Option 2: The SPECTER is equipped with two blow-off switches. This allows you to choose your blow-off style from over 17 variations. With the VYRO MOD sleeves you have even more variations to choose from.)
Build it up!
Assemble your shisha the way you want it, whether in a standard 41 cm size or a large pipe using the VYRO MOD smoke column and the various sleeves. With the VYRO MOD sleeve and the smoke column extension, you can extend your shisha by a further 10 cm.
The SPECTER is equipped with two blow-off switches. This allows you to choose your blow-off style from over 17 variations. With the VYRO MOD sleeves you have even more variations to choose from. To switch between the blow-offs, all you have to do is turn the lower switch above the base or plate of the shisha.
The plug-in bowl of the VYRO SPECTER comes as standard in a cut look in the colors clear, red, pink & blue. The standard sleeves of the SPECTER are unique epoxy sleeves with white as the base colour. There are also color accents in red, pink, black and blue.
The construction of the shisha is a bit more complicated than with other shishas due to the blow-off switches, which is why we recorded an extra assembly video for the assembly. (To the assembly video)
When cleaning the shisha, we recommend cleaning the bowl very carefully to protect the color. The plate with the VYRO monogram should also be cleaned carefully, as the coating can be removed if the cleaning is too intensive. The bowl must not be cleaned with warm water or cleaning agents/cleaning brushes. We therefore advise against cleaning the shisha in the dishwasher!
scope of delivery
1x head adapter made of V2A stainless steel
1x rubber head gasket black
1x charcoal plate made of V2A stainless steel with VYRO engraving
1x charcoal plate below made of V2A stainless steel
1x blow-off valve at the top made of V2A stainless steel to change the blow-offs
1x sleeve consisting of epoxy resin (exchangeable)
1x stainless steel tube made of V2A for smoke column
1x blow-off valve below made of V2A stainless steel to change the blow-offs
1x base (with VYRO logo engraving) with a hose connection made of stainless steel V2A
1x hose end piece made of stainless steel V2A
4x 7mm stainless steel ball and 4x 7mm POM ball
1x rubber seal for bowl
1x downstem made of V2A stainless steel with integrated diffuser
1x plug-in bowl (inner diameter 45 mm)
1x high-quality packaging
1x insert with assembly instructions
Weight: about 3.1 kg
Size: approx. 41 cm
Optimum water level: approx. 700 ml
No head or silicone hose / mouthpiece included.